Tankwashing Machines

Jetstream Model A

Specifications:

Operating Temperature Range: to 100 C
Cycle Times Available: 42 and 60 minutes
Typical Inlet Connection: PN16 - 80mm
Length: 325 mm
Width: 206 mm
Height 518 mm
Minimum Deck Opening: 305 mm
Weight: 54 kgs
Overall Nozzle Length: 900 mm

From its introduction in 1968 the Jetstream Model A has been one of the most successful Double Nozzle machines ever produced, reliability and simplicity of use have been it's greatest assests.

Designed specifically for use in a permanently installed system, the Jetstream Model A is operated by simply opening a supply valve. The pre-programmed wash cycle produces excellent results using Multi-stage or single stage oil washing. Close monitoring of the machine is not essential leaving personnel free to perform other duties.

No confusion can arise over which tanks are fully washed, partially washed or which particular wash band has been achieved.

When the supply valve is opened, no further adjustment is necessary until the set time cycle has passed, usually 60 minutes providing adequate supply pressure and stripping have been maintained.

A major advantage of the Jetstream Model A, as with all the Dasic range of tankwashing machines, is it's total flexibility. It can be mounted under the deck head by means of the Dasic Free Standing Unit which fits into any standard size tankwashing opening or at mid height or bottom mounted in an inverted position and supplied by 80mm bore pipe. This flexibility ensures optimum positioning of the machines for maximum coverage, a serious consideration particularly in the large and complex construction of wing tanks for Ore/Oil carriers. For OBO carriers the machine may be used in conjunction with the hatch mounted Dasic Swing Arm Unit.